Introduction¶

CircuitPython driver for use with IR Receivers.

Examples of products to use this library with:

Dependencies¶

This driver depends on:

Adafruit CircuitPython

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Usage Example¶

# Circuit Playground Express Demo Code
# Adjust the pulseio 'board.PIN' if using something else
import pulseio
import board
import adafruit_irremote
pulsein = pulseio.PulseIn(board.REMOTEIN, maxlen=120, idle_state=True)
decoder = adafruit_irremote.GenericDecode()

# size must match what you are decoding! for NEC use 4
received_code = bytearray(4)

while True:
    pulses = decoder.read_pulses(pulsein)
    print("Heard", len(pulses), "Pulses:", pulses)
    try:
        code = decoder.decode_bits(pulses, debug=False)
        print("Decoded:", code)
    except adafruit_irremote.IRNECRepeatException:  # unusual short code!
        print("NEC repeat!")
    except adafruit_irremote.IRDecodeException as e:     # failed to decode
        print("Failed to decode: ", e.args)

    print("----------------------------")

Contributing¶

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Building locally¶

To build this library locally you’ll need to install the circuitpython-build-tools package.

python3 -m venv .env
source .env/bin/activate
pip install circuitpython-build-tools

Once installed, make sure you are in the virtual environment:

source .env/bin/activate

Then run the build:

circuitpython-build-bundles --filename_prefix adafruit-circuitpython-irremote --library_location .

Sphinx documentation¶

Sphinx is used to build the documentation based on rST files and comments in the code. First, install dependencies (feel free to reuse the virtual environment from above):

python3 -m venv .env
source .env/bin/activate
pip install Sphinx sphinx-rtd-theme

Now, once you have the virtual environment activated:

cd docs
sphinx-build -E -W -b html . _build/html

This will output the documentation to docs/_build/html. Open the index.html in your browser to view them. It will also (due to -W) error out on any warning like Travis will. This is a good way to locally verify it will pass.

Table of Contents¶

Simple test¶

Ensure your device works with this simple test.

examples/irremote_simpletest.py¶

# Circuit Playground Express Demo Code
# Adjust the pulseio 'board.PIN' if using something else
import pulseio
import board
import adafruit_irremote
pulsein = pulseio.PulseIn(board.REMOTEIN, maxlen=120, idle_state=True)
decoder = adafruit_irremote.GenericDecode()

# size must match what you are decoding! for NEC use 4
received_code = bytearray(4)

while True:
    pulses = decoder.read_pulses(pulsein)
    print("Heard", len(pulses), "Pulses:", pulses)
    try:
        code = decoder.decode_bits(pulses, debug=False)
        print("Decoded:", code)
    except adafruit_irremote.IRNECRepeatException:  # unusual short code!
        print("NEC repeat!")
    except adafruit_irremote.IRDecodeException as e:     # failed to decode
        print("Failed to decode: ", e.args)

    print("----------------------------")

`adafruit_irremote`¶

Demo code for Circuit Playground Express:

# Circuit Playground Express Demo Code
# Adjust the pulseio 'board.PIN' if using something else
import pulseio
import board
import adafruit_irremote
pulsein = pulseio.PulseIn(board.REMOTEIN, maxlen=120, idle_state=True)
decoder = adafruit_irremote.GenericDecode()

# size must match what you are decoding! for NEC use 4
received_code = bytearray(4)

while True:
    pulses = decoder.read_pulses(pulsein)
    print("Heard", len(pulses), "Pulses:", pulses)
    try:
        code = decoder.decode_bits(pulses, debug=False)
        print("Decoded:", code)
    except adafruit_irremote.IRNECRepeatException:  # unusual short code!
        print("NEC repeat!")
    except adafruit_irremote.IRDecodeException as e:     # failed to decode
        print("Failed to decode: ", e.args)

    print("----------------------------")

Author(s): Scott Shawcroft

Implementation Notes¶

Hardware:

Software and Dependencies:

Adafruit CircuitPython firmware for the ESP8622 and M0-based boards: https://github.com/adafruit/circuitpython/releases

class adafruit_irremote.GenericDecode[source]¶

Generic decoding of infrared signals

bin_data(pulses)[source]¶

Compute bins of pulse lengths where pulses are +-25% of the average.

Parameters:	pulses (list) – Input pulse lengths

decode_bits(pulses, debug=False)[source]¶: Decode the pulses into bits.

read_pulses(input_pulses, max_pulse=10000, blocking=True)[source]¶

Read out a burst of pulses until a pulse is longer than max_pulse.

Parameters:	input_pulses (PulseIn) – Object to read pulses from max_pulse (int) – Pulse duration to end a burst blocking (bool) – If True, will block until pulses found. If False, will return None if no pulses. Defaults to True for backwards compatibility

class adafruit_irremote.GenericTransmit(header, one, zero, trail)[source]¶

Generic infrared transmit class that handles encoding.

transmit(pulseout, data)[source]¶

Transmit the data using the pulseout.

Parameters:	pulseout (pulseio.PulseOut) – PulseOut to transmit on data (bytearray) – Data to transmit

exception adafruit_irremote.IRDecodeException[source]¶: Generic decode exception

exception adafruit_irremote.IRNECRepeatException[source]¶: Exception when a NEC repeat is decoded