Introduction

Documentation Status Discord Build Status

CircuitPython driver for use with IR Receivers.

Examples of products to use this library with:

Dependencies

This driver depends on:

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-irremote

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-irremote

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install adafruit-circuitpython-irremote

Usage Example

# Circuit Playground Express Demo Code
# Adjust the pulseio 'board.PIN' if using something else
import pulseio
import board
import adafruit_irremote

pulsein = pulseio.PulseIn(board.REMOTEIN, maxlen=120, idle_state=True)
decoder = adafruit_irremote.GenericDecode()


while True:
    pulses = decoder.read_pulses(pulsein)
    print("Heard", len(pulses), "Pulses:", pulses)
    try:
        code = decoder.decode_bits(pulses)
        print("Decoded:", code)
    except adafruit_irremote.IRNECRepeatException:  # unusual short code!
        print("NEC repeat!")
    except adafruit_irremote.IRDecodeException as e:     # failed to decode
        print("Failed to decode: ", e.args)

    print("----------------------------")

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Documentation

For information on building library documentation, please check out this guide.

Table of Contents

Simple test

Ensure your device works with this simple test.

examples/irremote_simpletest.py
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
# Circuit Playground Express Demo Code
# Adjust the pulseio 'board.PIN' if using something else
import pulseio
import board
import adafruit_irremote

pulsein = pulseio.PulseIn(board.REMOTEIN, maxlen=120, idle_state=True)
decoder = adafruit_irremote.GenericDecode()


while True:
    pulses = decoder.read_pulses(pulsein)
    print("Heard", len(pulses), "Pulses:", pulses)
    try:
        code = decoder.decode_bits(pulses)
        print("Decoded:", code)
    except adafruit_irremote.IRNECRepeatException:  # unusual short code!
        print("NEC repeat!")
    except adafruit_irremote.IRDecodeException as e:  # failed to decode
        print("Failed to decode: ", e.args)

    print("----------------------------")

adafruit_irremote

Demo code for Circuit Playground Express:

# Circuit Playground Express Demo Code
# Adjust the pulseio 'board.PIN' if using something else
import pulseio
import board
import adafruit_irremote

pulsein = pulseio.PulseIn(board.REMOTEIN, maxlen=120, idle_state=True)
decoder = adafruit_irremote.GenericDecode()


while True:
    pulses = decoder.read_pulses(pulsein)
    print("Heard", len(pulses), "Pulses:", pulses)
    try:
        code = decoder.decode_bits(pulses)
        print("Decoded:", code)
    except adafruit_irremote.IRNECRepeatException:  # unusual short code!
        print("NEC repeat!")
    except adafruit_irremote.IRDecodeException as e:     # failed to decode
        print("Failed to decode: ", e.args)

    print("----------------------------")
  • Author(s): Scott Shawcroft

Implementation Notes

Hardware:

Software and Dependencies:

class adafruit_irremote.GenericDecode[source]

Generic decoding of infrared signals

bin_data(pulses)[source]

Compute bins of pulse lengths where pulses are +-25% of the average.

Parameters:pulses (list) – Input pulse lengths
decode_bits(pulses)[source]

Decode the pulses into bits.

read_pulses(input_pulses, *, max_pulse=10000, blocking=True, pulse_window=0.1, blocking_delay=0.1)[source]

Read out a burst of pulses until pulses stop for a specified period (pulse_window), pruning pulses after a pulse longer than max_pulse.

Parameters:
  • input_pulses (PulseIn) – Object to read pulses from
  • max_pulse (int) – Pulse duration to end a burst
  • blocking (bool) – If True, will block until pulses found. If False, will return None if no pulses. Defaults to True for backwards compatibility
  • pulse_window (float) – pulses are collected for this period of time
  • blocking_delay (float) – delay between pulse checks when blocking
class adafruit_irremote.GenericTransmit(header, one, zero, trail)[source]

Generic infrared transmit class that handles encoding.

transmit(pulseout, data)[source]

Transmit the data using the pulseout.

Parameters:
exception adafruit_irremote.IRDecodeException[source]

Generic decode exception

exception adafruit_irremote.IRNECRepeatException[source]

Exception when a NEC repeat is decoded

Indices and tables