Introduction

Documentation Status Discord Build Status

CircuitPython driver for TSL2561 Light Sensor.

Dependencies

This driver depends on:

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Usage Example

>>> import board
>>> import busio
>>> i2c = busio.I2C(board.SCL, board.SDA)
>>> import adafruit_tsl2561
>>> tsl = adafruit_tsl2561.TSL2561(i2c)
>>> tsl.lux
3294.37

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Building locally

To build this library locally you’ll need to install the circuitpython-build-tools package.

python3 -m venv .env
source .env/bin/activate
pip install circuitpython-build-tools

Once installed, make sure you are in the virtual environment:

source .env/bin/activate

Then run the build:

circuitpython-build-bundles --filename_prefix adafruit-circuitpython-tls2561 --library_location .

Sphinx documentation

Sphinx is used to build the documentation based on rST files and comments in the code. First, install dependencies (feel free to reuse the virtual environment from above):

python3 -m venv .env
source .env/bin/activate
pip install Sphinx sphinx-rtd-theme

Now, once you have the virtual environment activated:

cd docs
sphinx-build -E -W -b html . _build/html

This will output the documentation to docs/_build/html. Open the index.html in your browser to view them. It will also (due to -W) error out on any warning like Travis will. This is a good way to locally verify it will pass.

Table of Contents

Simple test

Ensure your device works with this simple test.

examples/tsl2561_simpletest.py
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
import board
import busio
import adafruit_tsl2561

# Create the I2C bus
i2c = busio.I2C(board.SCL, board.SDA)

# Create the TSL2561 instance, passing in the I2C bus
tsl = adafruit_tsl2561.TSL2561(i2c)

# Print chip info
print("Chip ID = {}".format(tsl.chip_id))
print("Enabled = {}".format(tsl.enabled))
print("Gain = {}".format(tsl.gain))
print("Integration time = {}".format(tsl.integration_time))

print("Configuring TSL2561...")

# Enable the light sensor
tsl.enabled = True

# Set gain 0=1x, 1=16x
tsl.gain = 0

# Set integration time (0=13.7ms, 1=101ms, 2=402ms, or 3=manual)
tsl.integration_time = 1

print("Getting readings...")

# Get raw (luminosity) readings individually
broadband = tsl.broadband
infrared = tsl.infrared

# Get raw (luminosity) readings using tuple unpacking
#broadband, infrared = tsl.luminosity

# Get computed lux value
lux = tsl.lux

# Print results
print("Enabled = {}".format(tsl.enabled))
print("Gain = {}".format(tsl.gain))
print("Integration time = {}".format(tsl.integration_time))
print("Broadband = {}".format(broadband))
print("Infrared = {}".format(infrared))
print("Lux = {}".format(lux))

# Disble the light sensor (to save power)
tsl.enabled = False

adafruit_tsl2561

CircuitPython driver for TSL2561 Light Sensor.

  • Author(s): Carter Nelson

Implementation Notes

Hardware:

Software and Dependencies:

class adafruit_tsl2561.TSL2561(i2c, address=57)[source]

Class which provides interface to TSL2561 light sensor.

broadband

The broadband channel value.

chip_id

A tuple containing the part number and the revision number.

enabled

The state of the sensor.

gain

The gain. 0:1x, 1:16x.

infrared

The infrared channel value.

integration_time

The integration time. 0:13.7ms, 1:101ms, 2:402ms, or 3:manual

luminosity

The overall luminosity as a tuple containing the broadband channel and the infrared channel value.

lux

The computed lux value.

Indices and tables