Introduction¶
A driver for the ST LPS35HW water resistant mems pressure sensor
Dependencies¶
This driver depends on:
Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.
Installing from PyPI¶
On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:
pip3 install adafruit-circuitpython-lps35hw
To install system-wide (this may be required in some cases):
sudo pip3 install adafruit-circuitpython-lps35hw
To install in a virtual environment in your current project:
mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-lps35hw
Usage Example¶
See the guide at: https://learn.adafruit.com
Documentation¶
API documentation for this library can be found on Read the Docs.
For information on building library documentation, please check out this guide.
Contributing¶
Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.
Table of Contents¶
API Reference
adafruit_lps35hw
DataRate
LPS35HW
LPS35HW.data_rate
LPS35HW.high_threshold_enabled
LPS35HW.high_threshold_exceeded
LPS35HW.low_pass_enabled
LPS35HW.low_threshold_enabled
LPS35HW.low_threshold_exceeded
LPS35HW.pressure
LPS35HW.pressure_threshold
LPS35HW.reset()
LPS35HW.reset_pressure()
LPS35HW.take_measurement()
LPS35HW.temperature
LPS35HW.zero_pressure()
Related Products