Introduction¶
CircuitPython module for SI4713 and SI4721 FM RDS transmitter.
Dependencies¶
This driver depends on:
Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.
Installing from PyPI¶
On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:
pip3 install adafruit-circuitpython-si4713
To install system-wide (this may be required in some cases):
sudo pip3 install adafruit-circuitpython-si4713
To install in a virtual environment in your current project:
mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-si4713
Usage Example¶
See examples/simpletest.py for a demo of the usage.
Documentation¶
API documentation for this library can be found on Read the Docs.
For information on building library documentation, please check out this guide.
Contributing¶
Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.
Table of Contents¶
adafruit_si4713
SI4713
SI4713.audio_signal_status
SI4713.configure_rds()
SI4713.gpio_control()
SI4713.gpio_set()
SI4713.input_level
SI4713.interrupt_status
SI4713.rds_buffer
SI4713.rds_station
SI4713.received_noise_level()
SI4713.reset()
SI4713.set_tx_power_capacitance()
SI4713.tx_antenna_capacitance
SI4713.tx_frequency_khz
SI4713.tx_power