Driver for the MLX90640 thermal camera
This driver depends on:
Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.
Installing from PyPI¶
On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:
pip3 install adafruit-circuitpython-mlx90640
To install system-wide (this may be required in some cases):
sudo pip3 install adafruit-circuitpython-mlx90640
To install in a virtual environment in your current project:
mkdir project-name && cd project-name python3 -m venv .env source .env/bin/activate pip3 install adafruit-circuitpython-mlx90640
import time import board import busio import adafruit_mlx90640 i2c = busio.I2C(board.SCL, board.SDA, frequency=800000) mlx = adafruit_mlx90640.MLX90640(i2c) print("MLX addr detected on I2C", [hex(i) for i in mlx.serial_number]) # if using higher refresh rates yields a 'too many retries' exception, # try decreasing this value to work with certain pi/camera combinations mlx.refresh_rate = adafruit_mlx90640.RefreshRate.REFRESH_2_HZ frame =  * 768 while True: try: mlx.getFrame(frame) except ValueError: # these happen, no biggie - retry continue for h in range(24): for w in range(32): t = frame[h*32 + w] print("%0.1f, " % t, end="") print() print()
API documentation for this library can be found on Read the Docs.
For information on building library documentation, please check out this guide.
Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.